Dehumidification >> Will A Dehumidifier Stop A Musty Smell

Technical data on design operating inlet and outlet conditions, air flows with diagram showing air volumes and conditions throughout the system, dehumidification capacity, filtration and fan motor and electrical power data. A general arrangement diagram with overall Will A Dehumidifier Stop A Musty Smell dimensions showing all major components with overall dimensions, utility and duct work connections, bolting arrangement, operating weight and required service and equipment removal clearances.
 
 Control diagrams for preconditioning of existing and or new air conditioning system stand alone use for dehumidifying air, electric circuits interface all control set points. Shop drawings shall indicate assembly, unit dimensions, weight loading, required clearances, Will A Dehumidifier Stop A Musty Smell construction details, and field connection details. Submit fan curves with specified operating point clearly plotted and sound power levels for both fan outlet and casing radiation at rated capacity.
 
Submit unit control system documentation required for interface with BACnet protocol DDC control system. Submit BACnet Will A Dehumidifier Stop A Musty Smell compliant Protocol Implementation Conformance Statement (PICS) for all controllers. Submit electrical requirements for power supply wiring including wiring diagrams for interlock and control wiring, clearly indicating factory‑installed and field‑installed wiring.
 
Certificate: Evidence of satisfactory performance on three similar installations. Provide installation, operating and maintenance instructions, in accordance with Article, INSTRUCTIONS, in specification Section 010000, GENERAL REQUIREMENTS. Performance test report: In accordance with PART 3. Completed System Readiness Will A Dehumidifier Stop A Musty Smell Checklists provided by the Commissioning Agent and completed by the contractor, signed by a qualified technician and dated on the date of completion, in accordance with the requirements of Section 23 08 00 COMMISSIONING OF HVAC SYSTEMS.
 
 applicable publications. The publications listed Will A Dehumidifier Stop A Musty Smell below form a part of this specification to the extent referenced. The publications are referenced in the text by the basic designation only. Air-conditioning, Heating and Refrigeration Institute (AHRI) Forced–Circulation Air-Cooling and Air-Heating Coils C. Air Movement and Control Association (AMCA): Standards Handbook Laboratory Methods of Testing Fans for Aerodynamic Performance Rating (ANSI) Laboratory Methods of Testing Fans for Aerodynamic Performance Rating (ANSI) American Society of Heating, Refrigerating and Air-Conditioning Engineers.
 
 METHOD OF TESTING General Ventilation Air Cleaning Devices for Removal Efficiency by Particle Size (ANSI). Ventilation for Acceptable Indoor Air Quality (ANSI) E. American Bearing Manufacturers Association (ABMA) 9-1990 Load Ratings and Will A Dehumidifier Stop A Musty Smell Fatigue Life for Ball Bearings (ANSI) F. National Fire Protection Association (NFPA) Standard for the Installation of Air-Conditioning and Ventilating Systems decoration: line-through; National Electrical Code 1.6 QUALITY ASSURANCE Fan Performance Ratings: Conform to AMCA 210 and bear the AMCA Certified Rating Seal.
 
 B. Sound Ratings: AMCA 301; tested to AMCA 300 and bear AMCA Certified Sound Rating Seal. C. Fabrication: Conform to AMCA 99. D. Air Coils: Certify capacities, pressure drops, and selection Will A Dehumidifier Stop A Musty Smell procedures in accordance with. Product of manufacturer regularly engaged in production of pool dehumidification equipment who issues complete catalog data on total product. Accept products on site in factory-fabricated protective containers, with factory-installed shipping skids and lifting lugs. Inspect for damage.
 
B. Store in clean dry place and protect from weather and construction traffic. Handle carefully to avoid damage to components, enclosures Will A Dehumidifier Stop A Musty Smell and finish. C. Comply with manufacturer rigging and installation instructions.
 
 PROJECT CONDITIONS
Do not operate units for any purpose, temporary or permanent, Will A Dehumidifier Stop A Musty Smell until duct work is clean, filters are in place, bearings lubricated, fan has been test run, all piping is connected and energized and all wiring complete and tested.
 
1.9 ADDITIONAL REQUIREMENTS
A. Provide one additional set of fan belts and disposable Will A Dehumidifier Stop A Musty Smell panel filters for each unit. Provide corrosion protection for all coils (located in the air-handling unit) and the casing surfaces, exterior and interior, exposed to ambient air in high-humidity locations (VA HVAC Design Manual Chapter 7) and as determined by the designer for a specific location. Coating should not be used or the chemically corrosive locations where the pH values are not within 3 to 12.
 
CORROSION PROTECTION
For air-handling unit mounted coils provide the following corrosion treatment: 1. Epoxy Immersion Coating – Electrically Will A Dehumidifier Stop A Musty Smell Deposited: The multi-stage corrosion-resistant coating application comprises of cleaning (heated alkaline immersion bath) and reverse-osmosis immersion rinse prior to the start of the coating process. The coating thickness shall be maintained between 0.6-mil and 1.2-mil.
 
Before the coils are subjected to high-temperature oven cure, they are treated to permeate immersion rinse and Will A Dehumidifier Stop A Musty Smell spray. Where the coils are subject to UV exposure, UV protection spray treatment comprising of UV-resistant urethane mastic topcoat shall be applied. Provide complete coating process trace ability for each coil and minimum five years of limited warranty. 2. The coating process shall such that uniform coating thickness is maintained at the fin edges.
 
The quality control shall be maintained by ensuring compliance to the applicable ASTM Standards for the Will A Dehumidifier Stop A Musty Smell following: a. Salt Spray Resistance (Minimum 6,000 Hours) b. Humidity Resistance (Minimum 1,000 Hours) c. Water Immersion (Minimum 260 Hours) d. Cross-Hatch Adhesion (Minimum 4B-5B Rating) e. Impact Resistance (Up to 160 Inch/Pound)Will A Dehumidifier Stop A Musty Smell Casing Surfaces (Exterior and Interior): All exposed and accessible exterior and interior metal surfaces shall be protected with a water-reducible acrylic with stainless steel pigment spray-applied over the manufacturer’s standard finish.
 
The spray coating thickness shall be 2-4 mils and provide minimum salt-spray resistance of 1,000 hours (ASTM B117) and 500 hours UV resistance (ASTM D4587). part 2– products 2.1 dehumidifier units A. General: Units shall be complete, factory assembled, and tested; and of sizes, arrangements, capacities, and performance Will A Dehumidifier Stop A Musty Smell as scheduled and as specified in the schedules shown in the drawings; and for indoor outdoor installation preconditioning of existing and new air conditioning system stand alone use for dehumidifying air.
 
SPEC WRITER NOTES:
1. Add chilled water section for situations when applications where post cooling is required. 2. The components included in the following paragraphs represent the wide range of components available to apply dehumidification systems to buildings. Will A Dehumidifier Stop A Musty Smell The designer must edit the following to include the components applicable to the project design requirements. Dehumidification shall be accomplished by use of a desiccant to absorb water vapor and maintain humidity control level independent of load variations within design limit and without use of refrigerants, compressors, or chilled water.

Florida Wind Damage Causing Tree Removal

We reported that these capability gaps are exacerbated by the need for a clear and consolidated body of PA guidance, and highlighted debris issues specifically in the following summary: FEM's policy on debris removal is unclear and thus open Wind Damage Florida Wind Damage Causing Tree Removal to interpretation. 

  read more..

WATER DAMAGE AND MOLD FROM FLOOD RESPONSE

WATER DAMAGE AND MOLD FROM FLOOD RESPONSE FLOOD RESPONSE - WATER DAMAGE AND MOLD HOW DO I PROPERLY CLEAN UP MY HOME IF IT HAS BEEN FLOODED OR HAS WATER DAMAGE? First, Water Damage WATER DAMAGE AND MOLD FROM FLOOD RESPONSE make sure electricity and natural gas or propane tanks are shut down. 

The Centers fo  read more..

Should You Put Plastic Under Your House In The Cra

Springtails (order Collembola) are very small, jumping insects that sometimes alarm homeowners by appearing in large numbers in moist indoor areas such as kitchen sinks, bathtubs, and in the soil of houseplants. They may also be found outdoors in swimming pools, moist landscaped areas or vegetable g  read more..

How To Ventilate A Crawl Space To Control Moisture

The Colorado Department of Public Health and Environment does not recommend testing as a first step to determine if you have a mold problem. Reliable air sampling for mold can be expensive and Crawl Space Drying How To Ventilate A Crawl Space To Control Moisture requires expertise and equipment that is not available to the general public. 
  read more..

Flood Damage

Fire Damage Flood Damage and can be very tricky, no two cases are the same. One fire may have been started from grease catching on fire at the kitchen stove another fire may be from an electrical short from the water heater. One thing for sure both of these fires can leave a mess you cannot believe and possibly   read more..

Smoke Damage

The fire combustion process when wood is burned is never quite complete and the Odor Control Smoke Damage from a wood burnt fire usually will contain a dark brown or black substance which has a very unpleasant odor. This tar looking substance is called creosote and is found almost anywhere in a wood house fir  read more..

Cold Water Extration

Increase staff exposure to scientific literature and news reports with the idea of remaining current on issues related to emerging contaminants (for example, human toxicity, endocrine disruption, interaction with engineered nano particles, and so forth), their movement in the environment, and [  read more..

Radon Poisoning Symptoms

Mechanical radon mitigation system monitors, such as manometer type pressure gauges, shall be clearly marked to indicate the range or zone of pressure readings that existed when the system was initially activated. A system description label shall be placed on the mitigation system, the electric serv  read more..

Flood Zone

Questions about the Biggert-Waters Flood zone Insurance Reform Act of 2012 1. What is the Biggert-Waters Flood zone Insurance Reform Act of 2012? Answer: The Biggert-Waters Flood Damage Flood Zone Insurance Reform Act of 2012 (BW-12) is a law passed by Congress and signed by the President in 2012 that extends the Nati  read more..

Flood Damage

Standardization of aeration rate, which took place through unoccupied episodes, active carbon dioxide observed by a Beckman LB-2 Infrared Analyzer, degree of deterioration of a known quantity, generally 1% indicated aeration rate.
Chief Odor Control Flood Damage factors involved three levels of < r *6 ^- 5  read more..