Structural Drying >> Water Damage

When Water Damage trapped water only – the amount of industrial air movers per day must stay the same. In crawlspace areas the amount of industrial air movers must be less than in completed living areas, but at least one industrial air mover per enclosed space; but the entire amount of industrial air movers must not be more than 50% of the entire amount of vent openings. Low amperage axial air movers are more efficient in moving a greater capacity of air.
 
  1. Larger high amperage axial kind air movers are more effective in wide open areas. Centrifugal air movers are best for high velocity air circulation across Water Damage flat surfaces. Plastic repression barriers, if used over an existing inside wall or door opening, or over an absorbent or poorly watertight inside door, but not over an existing outside door or window. When commercial drying services are executed and an appropriately completed Water Damage report is succumbed along with the detailed invoice, the insurance company and their claims adjuster must take into account the quantity of drying tools authenticated by the drying report for the drying period presented.
  2. The following fees could also be considered: additional heaters, high- density axial air movers with attached ducting when using low temperature heat; and work for first valuation and setup, daily checking, and final disassembly; all other work payments are contemplated as included. What is a Water Damage report? It is documentation of periodic temperature and relative humidity evaluations of both inside and outside air, plus moisture evaluations and the documented position of air movers on influenced and uninfluenced structure objects, as well as the drying objective and dry basic for the influenced objects.
  3. The appropriately completed drying report, an industry standard, must also include a dampness map, the daily working condition of the structure’s HVAC system and all the tools and gear used by the specialist. Water alleviation evaluation: In situations where the Water Damage drying costs presented with a drying report are outside the limits defined under method 2 given above, the claim evaluation procedure must contain an impartial evaluation of the charges by a capable third party; although, the evaluator’s suggestion must never succeed the terms, conditions and limitations of the policy or other insurance claim assistance.
  4. Water extraction, it is significant that the projected unit fee for water extraction reveal what is really needed, such as when removing water with a pump, hose and intermittent observing, as in pump-out; this is a dissimilar duty with a dissimilar expense compared to executing water extraction physically utilizing a wet vacuum or particular extraction tools when salvaging structure material. When flood water is extracted to assist the removal of carpet and padding, it is comprised in its removal unit charge; when it is used through the course of Water Damage, as in the elimination of spent cleaning water, it is also included in the cleanup unit charge. Other tools, when generators, adverse air moving fans, air purifying equipment, personal protective equipment, and any other tools.

Drug Lab Clean Up

Burning a meth-contaminated structure in lieu of decontamination is prohibited, unless priorapproval has been granted. Approval shall be obtained from the Kentucky Division for Air Quality Meth Lab Cleanup Drug Lab Clean Up prior to a training or practice burn. Safety of firefighter entry into a former meth lab structu  read more..

The Cost To Remove Lead Paint

How Are Workers Exposed to Lead?Workers can be exposed to lead by creating dust or fumes during everyday work activities. Fumes are easier to breathe in and therefore may be more dangerous than dust. These are some of the most common ways to be exposed. LEAD DUST is produced in Lead Paint Removal The Cost To Remove Lead Paint many ways i  read more..

Hurricane Katrina Flooding

FLOODED SEPTIC SYSTEMS What should I do if my septic system was flooded or damaged? Don’t use the system if the soil around the system is wet and flooded. The waste water will not be treated and will become a source of pollution.Once floodwaters have receded, Water Damage Hurricane Katrina Flooding there are several things  read more..

Asbestos Exposure

What is asbestos exposure? Asbestos exposure is the name given to a group of minerals that occur naturally in the environment as bundles of fibers that can be separated into thin, durable threads. These fibers are resistant to heat, fire, and chemicals and do not conduct electricity. For these reaso  read more..

How To Repair Cracked Circuit Boards

The abrasive and mildly corrosive nature of ash can damage computer and electronic systems. When possible, the best damage-preventive strategy is to shut down all computer, electric motors, and electronic systems until the ash has been completely removed from the equipment and the surrounding area,   read more..

Carpet Cleaning Without Water

Constituents from six major chemical groups were measured: radionuclides, major and trace elements, organo chlorine pesticides and PCBs, PAHs, UWI compounds, and current-use pesticides. The results of the chemical analyses are presented in tables 2–7. Interpretations of data listed in this report a  read more..

How To Test For Lead Paint

The measurement of your blood lead level(BLL) is the most useful indicator of the amount of lead being absorbed by your body. Blood lead levels are most often reported in units of milligrams (mg) or micrograms (µg) of lead (1 mg = 1,000 µg) per 100 grams (100 g), 100 milliliters (100 ml) or [M  read more..

BASICS OF A LEAD PAINT HEALTH

BASICS OF A LEAD HEALTH & SAFETY PROGRAM All of the following protective measures are important for preventing work-related lead poisoning. Review each item and check the box if the statement is true for your Lead Paint Removal BASICS OF A LEAD PAINT HEALTH workplace. 

Unchecked boxes may indicat  read more..

Troubleshoot An Electronic Circuit Board

Optical fiber cable assemblies consist of a combination of two or more of the following parts: optical fiber, cable, connectors, and assemblies. In most cases optical fiber is not used without some type of interconnection. Some of the test methods presented here have been developed at the GSFC Code   read more..

Waterproofing A Basement Wall

Remodeling Your Home? Have You Considered Indoor Air Quality?Controlling Moisture Too much moisture in a home can lead to mold, mildew, and other biological growth. This in turn can lead to a variety of health effects ranging from more common allergic reactions, to asthma attacks, and hypersensitivi  read more..