Water Damage >> Mold Mitigation

If there has been a lot of water damage, and/or mold growth covers more than 10 square feet, consult EPA's Mold Remediation in Schools and Commercial Buildings. Although focused on schools and commercial buildings, this Mold Mitigation document is applicable to other building types. If you choose to hire a contractor (or other professional service provider) to do the cleanup, make sure the contractor has experience cleaning up mold.

  1. Check references and ask the Mold Mitigation contractor to follow the recommendations in EPA's Mold Remediation in Schools and Commercial Buildings, the guidelines of the American Conference of Governmental Industrial Hygenists (ACGIH), or other guidelines from professional or government organizations. If you suspect that the heating/ventilation/air conditioning (HVAC) system may be contaminated with mold (it is part of an identified moisture problem, for instance, or there is mold near the intake to the system), consult before taking further action. Do not run the HVAC system if you know or suspect that it is contaminated with mold - it could spread mold throughout the building.
  2. If the Mold Mitigation and/or mold damage was caused by sewage or other contaminated water, then call in a professional who has experience cleaning and fixing buildings damaged by contaminated water. If you have health concerns, consult a health professional before starting cleanup. The tips and techniques presented in this section will help you clean up your mold problem. Professional cleaners or remediators may use methods not covered in this publication. Please note that mold may cause staining and cosmetic Mold Mitigation. It may not be possible to clean an item so that its original appearance is restored.
  3. Mold growing on the underside of a plastic lawn chair in an area where rainwater drips through and deposits organic material. Click on the image for a larger version. Mold growing on a piece of ceiling tile. Fix plumbing leaks and other water problems as soon as possible. Dry all Mold Mitigation items completely. Scrub mold off hard surfaces with detergent and water, and dry completely. Absorbent or porous materials, such as ceiling tiles and carpet, may have to be thrown away if they become moldy. Mold can grow on or fill in the empty spaces and crevices of porous materials, so the mold may be difficult or impossible to remove completely.
  4. Avoid exposing yourself or others to mold (see discussions: what to wear when cleaning mold and hidden mold. Do not paint or caulk moldy surfaces. Clean up the mold and dry the surfaces before painting. Paint applied over moldy surfaces is likely to peel. If you are unsure about how to clean an Mold Mitigation item, or if the item is expensive or of sentimental value, you may wish to consult a specialist. Specialists in furniture repair, restoration, painting, art restoration and conservation, carpet and rug cleaning, water damage, and fire or water restoration are commonly listed in phone books. Be sure to ask for and check references. Look for specialists who are affiliated with professional organizations.

How To Remove Storm Damage Debris

When soliciting for debris monitoring contracts, the advertisement should outline the required qualifications of the debris monitors. The Debris Removal How To Remove Storm Damage Debris qualifications should be appropriate for the individual responsibilities and duties. Debris monitors should have experience working on construction sites and  read more..

Ceilling Leak From Rain

GLOSSARY OF USEFUL TERMS Affected air the space within in a room or building which is influenced by or can influence the moisture content level of material inside that room or building. AHAM (Association of Home Appliance Manufacturers) an industry association which publishes test results for wate  read more..

Structural Drying

For many years, the standard building practice has always been to insulate the underneath of your floor over a ventilated, unconditioned Crawl Space Drying Structural Drying. A better method is to construct a well sealed, unventilated crawlspace, in other words build the crawlspace like a regular basement by sealing and ins  read more..

Monsoon Damage

In gabled tops, truss bracing generally consists of 2x4s that run the length of the top. If you do not really have truss bracing, it shall be replaced. You could do some of this yourself or hire a professional Wind Damage Monsoon Damage contractor. Place 2x4s the length of your top, overlapping the ends of the 2x4  read more..

Carpet Cleaning After Water Damage

The Federal Emergency Management Agency and the city of New Orleans recently announced additional Katrina-related grants totaling nearly $7 million that will directly benefit two recovery projects within the city – the Joe Brown Center in New Orleans East and Water Extraction Carpet Cleaning After Water Damage the Municipal Yacht Harb  read more..

Water Bear Carpet Cleaning

The Federal Emergency Management Agency recently announced more than $1 million in recovery aid to build a new Rockefeller Wildlife Refuge Fish Lab and Fish Lab Complex, Water Extraction Water Bear Carpet Cleaning which were destroyed during Hurricane Rita.

The Rockefeller Wildlife Refuge encompasses  read more..

Do It Yourself Mold Mitigation

If abatement procedures are expected to generate a lot of dust (e.g., abrasive cleaning of contaminated surfaces, demolition of plaster walls) or the visible concentration of the mold is heavy (blanket coverage as opposed to patchy), Mold Remediation Do It Yourself Mold Mitigation it is recommended that the remediation procedures for Le  read more..

Lead based Paint Is A Common Source Of Lead Poison

Asbestos-containing materials and lead-based paint have the potential to adversely affect human health and the environment. If properly handled, however, the risks are substantially reduced. The abatement of asbestos-containing material and lead-based paint is regulated by various federal, state and  read more..

Animal Damage

Skunks are very well-known, nocturnal residents of most of the country. The common striped skunk, is characterized by prominent, lateral white stripes that run all the way down its back. Otherwise, the skunk’s fur is jet black, the body of the adult striped skunk is about the same size o  read more..

Safely Get Water Out Of A Flooded Basement

Reinforce walls and footings to minimize shrinkage cracking and cracking due to uneven settlement. To retard movement of radon through hollow core masonry walls, the top and bottom courses of hollow masonry walls should be solid block, Basement Drying Safely Get Water Out Of A Flooded Basement or filled solid. 

  read more..