Mold Remediation >> Mold Testing Kit

How Can I Tell If I Have Mold ? The most practical way to find a mold problem is by using your eyes to look for mold growth and by using your nose to locate the source of a suspicious odor.If you see mold or if there is an earthy or musty smell, you should assume a mold  problem exists. Other clues are signs of excess moisture Mold Testing Kit or the worsening of allergy-like symptoms. 

Evidence of past or ongoing water damage also should trigger more thorough inspection. You may find mold growth underneath water-damaged surfaces or behind walls, floors Mold Testing Kit or ceilings. Look for visible mold growth (may appear cottony, velvety, granular or leathery and have varied colors of white, gray, brown, black, yellow or green).

Mold often appears as discoloration, staining or fuzzy growth on the surface of building materials or furnishings.When mold is visible, Mold Testing Kit testing is not recommended. Search areas with noticeable mold odors. Look for signs of excess moisture or water damage. Look for water leaks, standing water, water stains and condensation problems. 

For example, do you see any watermarks or discoloration on walls, ceilings, carpet, woodwork Mold Testing Kit or other building materials? Search behind and underneath materials (carpet and pad, wallpaper, vinyl flooring, sink cabinets), furniture or stored items (especially things placed near outside walls or on cold floors). Sometimes destructive techniques may be needed to inspect and clean enclosed spaces where mold and moisture are hidden; for example, opening up a wall cavity.

How Does mold Grow?
Mold can grow almost anywhere there is water, Mold Testing Kit high humidity or dampness. When mold spores land on a damp spot they begin growing and digesting whatever they are growing on in order to survive. This digestion process, if unchecked, will eventually damage and then destroy the organic material the mold is feeding on. The way to control indoor mold growth is to control moisture. Removing the source of moisture — through repairs or dehumidification — is critical to preventing mold growth.

Should I Be Concerned About mold In My Home?
Yes. If indoor mold contamination is extensive, it can cause very high and Mold Testing Kit persistent airborne spore exposure. People exposed to high spore levels can become sensitized and develop allergies to the mold or other health problems.mold growth can damage your furnishings, such as carpets, sofas and cabinets. 

Clothes and shoes in damp closets can become soiled. In time, Mold Testing Kit unchecked mold growth can cause serious damage to the structural elements in your home. If you can see or smell mold inside your home, take steps to identify and eliminate the excess moisture and to cleanup and remove the mold .

What Should I Do If I Suspect My Health or My Child's Health Is Affected?
If you believe that you or your child has symptoms that you suspect are caused by exposure to mold, Mold Testing Kit you should see a physician. Keep in mind that many symptoms associated with mold exposure also may be caused by many other illnesses. You should tell your physician about your symptoms and when, how and for how long you think you or your children were exposed to mold .

How Can I Prevent Indoor mold Problems In My Home?
Inspect your home regularly for the indications Mold Testing Kit and sources of indoor moisture and mold . Take steps to eliminate sources of water as quickly as possible. Stop the source of leak or flooding. Remove excess water with mops or wet vacuum.

Whenever possible, move wet items to a dry and well-ventilated area or outside to expedite drying. Move rugs and pull up areas of wet carpet as soon as possible. Open closet Mold Testing Kit and cabinet doors and move furniture away from walls to increase circulation. Run portable fans to increase air circulation.

Run dehumidifiers and air conditioners to lower humidity. Do NOT use the home's central blower if flooding has occurred in it or in any of the ducts. Do NOT turn up the heat or use heaters in confined areas, as higher temperatures increase the rate of mold growth. If water has soaked inside the walls, Mold Testing Kit it may be necessary to open wall cavities, remove baseboards, and/or pry open wall paneling.

Spraying with a household disinfectant on fungi and mold will not remove the organisms and can exacerbate breathing problems. Keep indoor surfaces as dry as possible. Try to maintain the home's relative humidity between 20-40 percent in the winter and less than 60 percent the rest of the year. Provide adequate ventilation, air circulation near cold surfaces, Mold Testing Kit dehumidification or other methods to minimize the production of moisture in the home and control high humidity that frequently causes mold growth in our cold climate.

Should I Test For mold ?
You probably do not need to test for mold . mold testing can be expensive and time consuming, and it usually requires special equipment and trained technicians to obtain reliable results. But most importantly, Mold Testing Kit you probably will not get the results from your mold test for a couple of weeks, during which time the mold problems could become significantly worse.

If I Decide To Test, What Should Happen?
If you have your home tested, Mold Testing Kit a trained technician with special equipment will take an outdoor air sample at the same time as an indoor sample. This will allow the technician to determine whether the number of spores inside your home is significantly higher than the number outside your home. A higher indoor level could mean that mold is growing indoors. 

Once you determine the level of mold in a home, there are no standards for judging if the level could cause problems for the occupants or when a house is clean. However, sometimes mold growth is hidden and difficult to locate. In such cases, a combination of air (outdoor and indoor air samples) and bulk (material) samples may help determine the extent of contamination and where cleaning is needed. However, Mold Testing Kit  mold testing is rarely useful for trying to answer questions about health concerns.

How Should mold Be Cleaned?
The most effective way to treat mold is to correct underlying water damage and clean the affected area. mold should be cleaned as soon as it appears. Persons cleaning mold should be free of symptoms Mold Testing Kit and allergies and should wear gloves during the cleaning process. 

Small areas of mold should be cleaned using a detergent/soapy solution or an appropriate household cleaner. The cleaned area should then be thoroughly dried. Dispose of any sponges or rags used to clean mold. If the mold returns quickly or spreads, Mold Testing Kit it may indicate an underlying problem such as a leak which must be fixed to successfully eliminate mold problems. If mold contamination is extensive, a professional abatement company may need to be consulted.

How To Remove Residential Lead Paint

Lead test kits are products sold to consumers for use in detecting the presence of lead.Historically, test kits have been developed to detect lead-based paint as defined by the "Lead Safe Housing Rule," (24 C.F.R. Part 35). Under this rule, administered by the Department of Housing and Urban Develop  read more..

What Is A Normal Dehumidifier Setting In Degrees

Recuperative heat exchange is a universal technology applicable to vapor-compression, direct-expansion, and chilled-water air-handling-unit (AHU) coils; heat-powered desiccant dehumidification equipment; dehumidifiers; supermarket, ice-rink, and natatorium air-conditioning and dehumidification   read more..

How To Reduce Moisture In A Crawl Space

In tidewater red cypress, most cedars, and in redwood, it is highly resistant to decay and can even be used in contact with soil and semipermanent construction if there is no sapwood attached. Crawl Space Drying How To Reduce Moisture In A Crawl Space However, even these woods do not have the decay resistance of wood fully impregnated with an  read more..

Roof Leak Detection

Moldy surfaces should be cleaned first and then disinfected; some products do both in a single step. In all cases, mold spores should be removed as completely as possible since killing them does not eliminate their toxicity or allergenic properties.Application of Cleaners are most efficiently a  read more..

Protect Your House From Animal Damage

Step 4. Determine if young are involved After finding the main entry you need to verify that no young are inside before proceeding with the eviction process. Because each situation and each animal is different, do this even if it seems early or late in the year for young to be present. Failing to do  read more..

Structural Drying

Convalescent heat substitute is a worldwide skill appropriate to vapor-density, direct-growth, and cooled-water air-handling-unit (AHU) coils; heat-driven desiccant Dehumidification Structural Drying equipment; dehumidifiers; supermarket, ice-rink, and natatorium air-conditioning and dehumidification systems; and bundled   read more..

Lead Abatement State Programs

Lead abatement is an activity designed to permanently eliminate lead-based paint hazards. Abatement is often ordered by a state or local government, and can involve specialized techniques not typical of renovation activities. EPA requires individuals and firms who perform abatement projects in pre-1  read more..

FEMA Map

If my community is not participating in the CRS, what can I do to have my community join? The decision to join the CRS is a voluntary action of a community's elected officials. As with many community actions, citizens can contact their local elected officials and encourage the community to consider   read more..

Fema Debris Disposal And Flood Zones

Household Chemicals (i.e., Household Hazardous Waste (HHW)) can be taken to a county or municipal HHW facility for recycling or potentially reuse. Check with your local environmental health representative to see if a temporary HHW collection site has been established. If HHW cannot safely be removed  read more..

How To Get Rid Of Mold In A Crawlspace

Examples of where to insulate. 1. In unfinished attic spaces, insulate between and over the floor joists to seal off living spaces below. Attic access door. In finished attic rooms with or without dormer, insulate between the studs of "knee" walls, between the studs and rafters of exterior walls and  read more..